Setting The Operating Temperature - Beko FS1 66020 Manual Del Usuario

Setting the operating
temperature
The operating temperature is regulated
by the temperature control.
1 = Lowest cooling setting (Warmest
setting)
4 = Highest cooling setting (Coldest
setting)
(Or)
Min. = Lowest cooling setting
(Warmest setting)
Warm
1 2
(Or) Min.
Max. = Highest cooling setting
(Coldest setting)
Please choose the setting according
to the desired temperature.
The interior temperature also depends
on ambient temperature, the frequency
with which the door is opened and the
amount of food kept inside.
Frequently opening the door causes
the interior temperature to rise.
For this reason, it is recommended
to close the door again as soon as
possible after use.
Cold
3 4 5
Max.
OFF
The normal storage temperature of
your appliance should be -18 °C (0 °F).
If the thermostat knob is turned counter
clockwise from position 1, the appliance
will be switched off and "click" sound
will be heard. Lower temperatures can
be obtained by adjusting the thermostat
knob towards Position 4.
We recommend
temperature with a thermometer to
ensure that the storage compartments
are kept to the desired temperature.
Remember
immediately since the thermometer
temperature will rise very rapidly after
you remove it from the freezer.
Thermostat is located on the rear wall
of the cabinet (See above diagram) and
controlled by the thermostat knob.
15
EN
checking
at take the
Thermostat
OFF
the
reading