In the ON state, click "Mode" to switch the running mode.
The modes can be switched among cooling, heating,
dehumidification, and ventilation.
Click "fan speed" to switch from high, medium, low wind.
Click " Swing Up and Down" and " Swing Left and Right" to
turn on or off the corresponding swing. (Note: Some indoor
unit is without left and right swing, so they do not respond).
Click the "-" and "+" on the left and right sides to set
temperature. Click "shock" to enable or disable the key
vibration feedback function. The function of "set as common"
sets the current indoor unit as commonly used, and displays
this indoor unit each time when the indoor unit control is
turned on. (This function is reserved).
The "advanced key" is reserved.
26
V.1