EAS ELECTRIC ECG145CM Manual De Instrucciones página 72

Click "Lock" to enter the lock function setting.
In the lock setting interface, click on the right side of the indoor
unit name
function.
Available time selects when the lock will take effect. The
controller selects whether to enable the remote lock of the
internal unit.
The mode lock selects indoor unit limited operation mode, and
can select cooling, dehumidification, heating, and ventilation.
The temperature range selects the setting temperature for in-
door unit limited operation.
After the above settings are selected, click OK to save the
settings.
When the mode lock and locked temperature range are
selected, the device will be restricted to operate at the setting
value. If the range is exceeded, the server will control the indoor
unit according to the setting value. The priority of the setting
mode is from the highest to the lowest, cooling, dehumidifying,
heating, and ventilating. Indoor unit can only be performed
within the locked temperature range. If it is less than the
minimum value, it will run as the minimum value, if it is greater
than the maximum value, it will run as the maximum value.
and select whether to enable or disable the lock
28
V.1