CAUTION
• Please protect from exposure
to wet conditions, heat, hu-
midity, impact, high pressure or
other extreme conditions.
• Please do not attempt to disas-
semble or repair by yourself.
• This is not a toy, please keep out
of the reach of the children.
PARTS
1. Answering / rejecting calls
2. M function key
3. Function key "-" / Volume down /
previous track
4. Function key "+" / Volume up / next track
5. ON/OFF key / Play key
6. Audio jack
7. USB output
8. MicroSD card slot
9. Micro USB charging port.
10. LED
Charging
Please charge the speaker fully before first use.
The speaker has a built-in battery; to avoid damaging the set, do not remove the battery.
1. Connect the cable from the USB connector side to a power supply of maximum voltage
5V DC. The power source can be a USB port of a computer that is turned on or a mains
charger with a USB output.
2. Connect the cable from the charging port side to the speaker.
Charging is indicated by lighting up the red LED. The device indicates the battery is fully
charged by lighting up the green LED.
Turning on
In order to turn the speaker on press and hold the ON/OFF button. When it has