Internet Requirements - LiftMaster Smart Video Intercom S Manual De Instalación

INTRODUCTION

Internet Requirements

When selecting a router, use the information below to ensure compatibility.
INTRODUCTION
MODEL: CAPXS - Smart Video Intercom S
CAPXS can be connected to a router via a wired connection or Wi-Fi. LiftMaster recommends a minimum upload/download speed of
5Mbps for each CAPXS supporting video camera feeds.
NOTE: This upload speed should be met when considering usage of other devices on the network like cameras and computers.
INTRODUCTION
CAPXS IS COMPATIBLE WITH ROUTERS USING THE
FOLLOWING Wi-Fi COMMUNICATION PROTOCOLS:
• 802.11b
• 802.11g
• 802.11n
INTRODUCTION
ADDITIONAL COMPATIBILITY CONSIDERATIONS:
• DO NOT use Wi-Fi extender devices. These may introduce latency in the connection leading to choppy or loss of reliable video transmission.
• If using a Wi-Fi signal strength tool or app, a continuous Wi-Fi signal strength connection of at least -65 DBM (numbers closer to zero are
stronger strength) at the CAPXS must be guaranteed to ensure an acceptable connection to the local network.
• Hidden network SSIDs are not supported. The network must be selectable from the CAPXS display.
• Wi-Fi networks requiring secondary authentication are not supported (E.g. Hotels and airport Wi-Fi).
INTRODUCTION
• When checking signal strength in CAPXS admin mode, we recommend at least two bars, as shown on the CAPXS screen.
ACCOUNT SETUP
ACCOUNT SETUP
ACCOUNT SETUP
ACCOUNT SETUP
ACCOUNT SETUP
POWER NETWORK/MOUNTING
POWER NETWORK/MOUNTING
POWER NETWORK/MOUNTING
CAPXS WI-FI SECURITY COMPATIBILITY
• WPA3 Personal
• WPA2 Personal (AES)
POWER NETWORK/MOUNTING
POWER NETWORK/MOUNTING
9
ACCESS CONTROL
ACCESS CONTROL
ACCESS CONTROL
ACCESS CONTROL
ACCESS CONTROL