Wiring Diagram; Indoor Monitor - TMEZON MZ-IP-V739B Manual Del Usuario

Description Of The Indoor Monitor
Accessories

Indoor monitor

Screw anchors
(1pcs) (4pcs)
1
2
Monitoring
Wall screws
Talk
Unlock (4pcs)
Hang up
LAN
A Network Conversion
Line with 4 pin terminal
(1pcs)

Wiring Diagram

Can connect up to two cctv cameras, the definition for the cctv cameras should be as below:
AHD(720P/1080P) / TVI / CVI / CVBS
Can connect up to two doorbells, the definition for the doorbells should be as below:
AHD(720P/1080P) / TVI / CVI / CVBS.
Connect up to two ​ e xtension indoor monitors
Note:
1. The CCTV camera must use an external power supply.
2. AHD/TVI/CVI/CVBS definition cameras can be mixed connected.
3. When mixed-resolution cameras are connected to the main monitor, suggest that the connected
slave monitor is AHD(720P or 1080P). If the CVBS slave monitor is connected, you can only view
the image of the CVBS camera on the slave.
4. All the cameras must be connected to the monitor before powering on the monitor.
AC/DC power adapter
Lock(not
for lock(not included)
included)
DC12V
DC12V
AUDIO
AUDIO
GND GND
VIDEO VIDEO
DOOR1
DOOR1
AC/DC power adapter for
Alarm
camera(not included)
ALM
NC
ALM
GND
VIDEO
DC 12V
CAM1
CAM1
AC/DC power adapter for
Alarm
camera(not included) ALM
NC
ALM
GND
DC 12V VIDEO
CAM2
CAM2
Bracket
4pin cable
User Manual
(1pcs)
(1pcs) (5pcs)
OPERATION INS
4-Wire IP 7 Inch V ideo Door
User Manual
External switching power supply
DC 12V
AC/DC power adapter Lock(not
for lock(not included)
included)
IP Indoor Monitor
(Main)
DOOR1 DOOR2
DC12V DC12V
VCC VCC
AUDIO AUDIO
Audio
Audio GND
GND
GND GND
VIDEO
VIDEO
Video Video
DOOR2
CAM1 CAM2 OUT
AUDIO
NC NC Audio GND
ALM
ALM GND DATA
GND GND DATA
VIDEO
Video Video Video
OUT
NET
DC IN
TX+
GND
TX- VCC
RX+
RX-
External switching power
supply (DC 12V)
External switching power
supply (DC 12V)
AUDIO
IN
GND
DATA
VIDEO
OUT AUDIO
GND
DATA
Indoor monitor VIDEO
(slave)
To next extendable unit
GB-1
Note On Wiring Connection
The power supplies for electric lock, CCTV cameras and extension cables are not included in the
package, user can purchase according to actual requirement.
In the standard delivery the system supports locks with Normally Open (N.O.) door unlocking
method. It means that in the normal state the dry contact is opened so the lock is kept under
constant closed state. If the unlocking push-button is pressed and the dry contact is changed to
closed, then the lock is released.
Please check that the socket of power supply(silk printing J01) is correct if you connect the
external switching power supply, otherwise it will damage the device. Please first pull out the
DC power plug before installation of device(Shown as below).
Wiring connection according to the following to avoid interference:
A. Wiring connection between outdoor bell and IP indoor monitor.
Power+
Audio
B. Wiring connection between indoor monitors.
Data
Audio
Please note the silk printing marked on PCB in order to avoid incorrect connecting.
The wiring connection requirement(The actual effect and the quality of wire rod has
the very big relations):
1. 4-Core ordinary unshielded and shielded wiring cable;
2. Effective distance from the outdoor camera to furthest indoor monitor:
Transmission ≤30m (4x0.4mm )
DOOR2
Transmission ≤50m (4x0.65mm )
Unshielded wiring cable:
DC12V
AUDIO
GND
VIDEO
3. If you want to extend the distance over 50m, you'd better to choose a thick copper core
cable , or a shielded wiring cable (75-4+2*0.5mm shielded coaxial wiring cable) , or a 3-core
ordinary unshielded wire + a 75-3 video wire.
Video Power+ Video
Audio
GND GND
Video
Data Video
Audio
GND GND
2
2
2
GB-2
DC12V
AUDIO
GND
VIDEO