SUPAIR FLUID LIGHT Manual De Usuario página 57

Notice d'utilisation parachute | FLUIDLIGHT
>> Separate riser - reserve parachute connection.
One (1) square 7mm Maillon Rapide® will be needed + three (3) flexible toric rings.
1
- Open the 7mm square - Push the end of the
Maillon Rapide®. short riser through the
- Push the maillon toric ring.
through the toric ring - Push the maillon
- Twist through the risers
buckles.
6
- Tidy up the assembly.
- Be certain for the riser end loops to be securely fastened.
- Close the Maillon Rapide® tightly by hand.
- Tighten using pliers and making a ¼ turn.
Connecting : reserve parachute - harness
2 3
- Give a second twist to
the toric ring.
- Push the buckle
through the maillon.
4
- Give a slide to the - Repeat sequence 1 through 3 with the 2 bridles suc-
riser towards the other cessively.
side of the Maillon
Rapide®
5
SUPAIR | FLUIDLIGHT | page 12