Publicidad
Idiomas disponibles
Idiomas disponibles
QUICK GUIDE
SPECIFICATIONS AND CONNECTIONS
CONFIGURATION:
Device parameters: IP, extension, volume... are configured from unit's webserver. Device's IP can be seen on the label located on its back panel; it is also played through the
speaker every time the unit is restarted.
Connect the device to the network through the WAN POE port. To access the webserver, from a PC connected to the same network or to the PC port, type the IP of the unit in the
address bar of the web browser. It is essential that the PC has access to that IP, either because it is in the same IP range, or because the network is configured to such effect. Default
username and password are "admin", "admin".
Edge and Chrome browsers are recommended. For more details see the "EP44_webserver_configuration" manual.
https://www.optimusaudio.com/arxius/i_tecnica/EP44SIP_Webserver_Manual.pdf
This device has two output contacts, by default CT1 is used as a door opener, it can be activated during the call by dialing the DTMF 9 tone, and CT2 as a
status contact, it is activated during calls. These parameters are configurable from the webserver.
EP-44SIPH includes a pre-recorded reassuring message for blind people, which is played during call establishment: "call in progress".
Power supply
Consumption
Dimensions
Peso
Finish
Output contacts
Protection
Included accessories
Optional accessories
Other
EP-44SIP/SIPH Version 1.1
1. Speaker
2. Call button with red LED indicator
3. Microphone
4. Ethernet PC
5. Ethernet WAN POE
6. Power supply input 12 Vdc (+,-)
7. Output contacts
EP-44SIP
POE / 12 Vdc
1.5 W standby, 2.5 W Max
186 x 123 x 35.6 mm
0.84 kg
Stainless Steel
CT1/CT2: Relay, Max 125 Vac, 60 Vdc, 2 A
IP-65 (with CS-EP), IK10
CAT5 UTP cable (2 m)
Power source 12 V, 2 A (1.5 m cable) + cable adapter (2 m)
4 security screws M4/20 + wrench, for surface box
4 self-tapping screws 3/20 + wrench, for flush mounting and posterboard boxes
Wall mounting box CS-EP
Flush mounting box CEP-EP
Plasterboard box CET-EP
-
1/1
SIP AUDIO STATION
EP-44SIP / EP-44SIPH
WARNING:
Make sure the power outlet conforms to the power
requirements before connecting the equipment.
Do not install the unit near heat sources.
Only qualified service personnel should be allowed to
install and operate the unit.
EP-44SIPH
1.5 W standby, 10 W Max
0.9 kg
Reassuring message
SOS indication, text and braille
Induction loop
Publicidad
