Descaling - Wilfa RAPIDS Manual De Instrucciones

WATER KETTLE · WKW-5S/WK2GX-1500/WK3X-2000
USER DIRECTIONS
During first time use, pour out the first batch of boiling water to dispose of dust
and other impurities.
1. Fill water through the designated opening
2. Never fill less than 0.5 litre of water to avoid boiling dry. Also, never fill more
than MAX of water.
3. Close the lid.
4. Unplug the kettle from the wall outlet.
5. Push the power switch.
6. The lamp will light when the kettle is switched on.
7. When the water starts boiling, the safety feature automatically turns the kettle
off.
8. Remember! If the kettle is lifted off its base, it will automatically shut off, and
the boiling will stop. It can be restarted after 30 seconds by pushing in the
power switch.
9. Lift the pot from its base before attempting to pour from it.
10. Unplug the heater from the outlet and let the pot cool off before moving it.
11. Remember! If you wish to interrupt the boiling process, simply set the pow-
er switch to zero.
CLEANING
1. Unplug the kettle.
2. Do not immerse the base and kettle in water or any other liquids.
3. If the pot is dirty, use a mild cleaning agent.
4. Do not use any sharp objects.
Damage caused by calcium deposits is not covered by warranty.

DESCALING

•
Fill the kettle with 1/3 white vinegar and 2/3 water and boil or allow it to
stand overnight.
•
Empty solution from kettle and fill kettle with clean water and boil.
•
Discard the boiled water as it might contain remains of vinegar
•
Rinse kettle with clean water.
We recommend descaling to be done regularly, it should be done with the
follow ing intervals;
•
Water with low content of lime: every 3-4 months
•
Water with medium content of lime: every 4-6 week
•
Water with high content of lime: every 2-4 week
7
EN