Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE
READ THE INSTRUCTIONS BEFORE USE
WARNING: For safety purposes, always place blade before putting food.
1.
Align the tabs on the processor bowl with the L-slots on the motorize base. Turn the
processor bowl counterclockwise to lock onto the base.
2.
Place the blade over the shaft in the center of the processor bowl and press down and
twist clockwise to securely lock into operating position.
3.
Place the desired ingredients in the processor bowl.
NOTE: Cut the fruits/vegetables into small pieces.
NOTE: To achieve optimal results when grinding raw meat, use the continuous button to
grind up to 200 g of meat at a time.
4.
Lock the lid on the processor bowl, aligning the L-Slots on the lid with the tabs on the
processor bowl. Turn the lid counterclockwise to securely lock onto the bowl.
CAUTION: The appliance has a locking mechanism that prevents the appliance from
operating or blade from turning if the lid is not securely attached to the base.
5.
Plug the appliance into a standard 120-volt AC electrical outlet.
6.
Select the desired speed control. Press lever downwards for PULSE "
used for processing ice, fruits or frozen vegetables. For continuous processing, lift the lever
to "|" for LOW speed or hold lever at "
(lever will return to "
WARNING: The recommended maximum operating time for each speed is 1 minute
consecutive. Allow 3 minutes rest in between operations.
7.
Use the wet ingredient adder located under the spoon to add liquid ingredients while
processing, if desired.
8.
When the ingredients are processed to the desired consistency, turn off the appliance, " ".
9.
Once the stainless-steel blade has stopped turning, remove the lid from the processor bowl
by turning clockwise and lifting off.
10.
Remove the blade from the processor bowl by turning counterclockwise and lifting it off.
11.
Remove the bowl from the base by turning it clockwise and lifting it. Pour the mixture in a
bowl or use it as you want in your recipe.
12.
Clean parts and accessories immediately after each use.
" for HIGH speed to obtain the desired texture
" position automatically once "
", short bursts
" is released).
7
Publicidad
Tabla de contenido
