Disposal; Maintenance And Cleaning - Zepter morejuicepress TF-999F Manual De Instrucciones

EN

1.3 DISPOSAL

At the end of its lifecycle, we recommend making the machine safe by cutting the power cord.
Do so only after unplugging it from the mains!
Do not dispose of the machine as ordinary rubbish, but leave it with personnel qualified to collect such material.
In this way, it will be properly disposed of and recycled.
This is a valuable aid for safeguarding our environment!

2. MAINTENANCE AND CLEANING

1 2
OFF
Turn the device Off Remove the drum with hopper from the
WARNING! main body by pulling the the drum out.
Unplug the appliance from the mains
Ensure that the hopper is in "close"
before cleaning.
position.
4
Separate the squeezing screw from the drum and disassemble it.
Turn the upper part of the squeezing screw counterclockwise to release
the upper part from the lower part.
8
3
Juice
ejectors
Turn the hopper counterclockwise to
position "open" and open it.
5
Remove the rubber pad from the inner
side of the squezing screw.
6 7
Use the brush to clean the squeezing Use the tip of the brush to take out
screw thoroughly after use. residues from the drum outlets.
Note!
Do not use detergents that contain
organic solvents, bleach, chlorine,
benzene or abrasives.
9 10
Use a soft damp cloth to clean the main Dry all components thoroughly.
body.
Attention!
Attention!
Do not dry the device and its parts
Never immerse the main body in water with a heater.
and/or never wash it under running
water!
EN
8
To access the inner part of the drum,
the rubber pads must be remove firstly.
Dishwasher Instructions!
The squeezing screw, hopper and
drum are dishwasher safe.
1. Separate the squeezing screw and
the rubber pad from the screw.
2. Rinse all parts under running water
and remove residues if needed.
Note! Use the brush to remove any
trapped particles.
3. Put all components into dishwasher.
Attention!
Never put the main body into the
dishwasher. To clean the main body
use only soft damp cloth.
9