RiverRidge 06-195 Instrucciones De Ensamblaje página 12

STEP 9
1. Attach 2 hinges (F) to lower left support board (4) by inserting 4 screws (G) through holes on
hinges (F), then tighten to lower left support board (4).
2 Attach 2 hinges (F) to lower right support board (5) by inserting 4 screws (G) through holes
on hinges (F), then tighten to lower right support board (5).
3. Insert 4 wood dowels (C) into dowel holes on lower cross bar (8).
4. Attach lower cross bar (8) to lower left support board (4) and lower right support board (5) by
inserting wood dowels (C) into dowel holes on lower left support board (4) and lower right
support board (5).
STEP 10
1. Attach lower left side panel (2) and lower right side panel (3) to lower left support board (4)
and lower right support board (5) by inserting 6 screws (M) through holes on lower left side
panel (2) and lower right side panel (3), then tighten to lower left support board (4) and lower
right support board (5).
G G
F
G G
5
M
M
G G
F
8
F
M
3
M
5
4
G G
F
M
M
4
8