Descargar Imprimir esta página

Infiniton SPLIT-2323MF Manual De Instrucciones página 16

Ocultar thumbs Ver también para SPLIT-2323MF:

Publicidad

Idiomas disponibles

Idiomas disponibles

--------
* The iCLEAN function runs for approximately 30 minutes,
during which if the unit is turned on with the remate controller
or this button is pressed again, the iCLEAN will be deactivated.
8 . ..A..orT
* Each time the "�' is pressed, the temperatura setting will
º
increase by 1
C and each time the "T" is pressed, it will
º
decrease by 1
C.
* a.lf the type of controller remate is YKR-H/101 E or YKR-H/102E ,
setting temperatura range is
b.lf the type of controller remate is YKR-H/132E, setting
temperatura range is
e.Sorne area don't have the YKR-H/132E. Local regulation and
actual object shall prevail .
Note: The temperature cannot be set in AUTO or FAN mode, thus
these two buttons are not functional.
9. TURBO
* Press this button only in COOL or HEAT mode to set TURBO
on or off to speedy the cooling or heating.
* When TURBO is on, the air speed is HIGH.
* When TURBO is off, the air speed will restare to previous
status.
10. MODE
* Press this button, you can select the running mode as follows:
C AUTO-+COOL--DRY--HEAT -+FAN ]
Note: HEAT mode is not available for cool only units.
11. SLEEP
* Press this button to enter SLEEP mode, which the unit will
exit after 1 O hours of continuous operation and restare to the
previous status.
Note:The SLEEP function cannot be activated in FAN mode.
12. SWING t
* Press this button to activate up/down swing and press it again
to fix the swing position.
13. SWING++
* Press this button to activate left/right swing and press it again
to fix the swing position.
www.infiniton.es
©@
Buttons descriQtion
°
°
C"-'32
16
º
º
º
20
C,.__,28
C (68
F "-'82
e
°
°
C(60
F "-'90
F).
º
F).

Publicidad

loading

Este manual también es adecuado para:

Split-3726mfSplit-4626mfSplit-3910jmSplit-6226jm