ErgoAV ERTSL2-01B Manual De Instrucciones página 9

Supplied Parts and Hardware for Step 3
This bolt is shown in actual size.
(S) x4
M6x50mm
Bolt
(V) x1
5/32 in (4mm)
Allen Key
Step 3 Connect the TV Plate [M] to Support Pillar [P]
Note: Before attaching the TV Mounting
Plate to the pillar, measure the distance
from the upper hook on the TV Bracket
to the bottom of the TV. Then refer to
chart below for the recommended
mounting location. To add an additional
"2" of space between your TV and the
base, use the lower hooks located on
the TV Brackets. We always recommend
using the lowest possible attachment
location for the safest assembly.
Distance from the hooks on the TV
Brackets to the bottom of the TV
20 1/8" to 23 1/2"
16 3/4" to 20 1/8"
Less Than 16 3/4"
(T) x4
M6x8mm
TV Plate
Bolt
(X) x2
Safety Strap
09
(M) x1
Swivel Component
Mounting Location #1
Mounting Location #2
Mounting Location #3
Recommended TV Mounting
Plate Location
Location #1
Location #2
Location #3
(A) x1