Overload Warning - Thulos TH-BD30 Manual De Instrucciones

3. TARE
Put container on the platter, once the weight reading is stable, press the TARE key, the tare indicator will
be on and the containers weight will be deducted. When it is time to clear the tare, take off the
container, and press tare key again.

4. OVERLOAD WARNING

Please do not add item that is over the maximum capacity, when the scale is ringing an alarm, remove
the item on the platter to avoid damage to the load cell.
5. UNIT PRICE SETTING
To trade with the scale, it is necessary to setting a unit price of the goods, then use this unit price to
determine how much value of the goods which placed on the platter.
When scale displaying the weight of the goods placed on the scale, set the unit price through numeric
keys, set unit price is showed in unit price window display, total price window display shows the total
price of the goods. To cancel the previous unit price, press C key.
ACCUMULATOR OPERATION
1. PREPARE TO ACCUMULATE
Each time before accumulate, please make sure the platter is empty, the current accumulator values is
reset to zero, and the weight reading is stable.
2. ACCUMULATION OPERATION
Put the weight item on platter, wait for the weight reading to be stable, enter the price and press the
add key, the window will show "add n" being the number of how many times you press add. Now, press
M+ key. Now, remove the first item from the platter, and repeat the previous step.
You can carry on this way for 99 times with the scale.
3. ACCUMULATE CLEAR
You can clear the accumulated value by press C (clear) key at any time.
4. UNIT PRICE STORAGE
The scale can store 8 sets unit price.
5. STORE THE UNIT PRICE
Press store key, then enter desired unit price using numeric keys.
Now press M*(*=1 to 8) key. The value will be stored into respective M*(*=1 to 8) key. If you have
already entered any value in that key, it will be replaced by new value.