Maintenance & Cleaning - KRHÜNER 51450 Manual De Instrucciones

2. HOW TO USE
• Place the collar ring on the rim.
• Remove the plastic lid from the warmer.
• Adjust the wax can holder for easy handling. Introduce the wax can on the warmer.
• Turn the temperature control knob and set the dial on "100" until the wax achieves
a liquid consistency. This process lasts approximately 10-15 minutes. For faster heat-
ing, place the lid on the warmer.
• Once the wax is liquid, place the dial into the middle position. The temperature will
remain constant on this position.
• Caution: Before starting the treatment, make sure that the wax temperature is safe.
Let it cool down a bit or place the wax on the hair-removal paper band for treating.
Ensure that the skin is absolutely clean before its use.
• Use a wooden spatula to cover the skin surface. The thinner the wax layer is, the
easier the hair removal becomes.
• Place the paper band onto the skin surface and pull it off quickly in the opposite
direction of the hair growth.
• When the hair removal is finished, lift out the can while the warmer is still warm.
• Turn the warmer off by full turning the dial counter clock wise. Cover the warmer
with the clear lid to keep the wax dust-free.
• After treatment, use a smoothing lotion onto the skin treated and massage.
3. MAINTENANCE & CLEANING
• To clean the warmer, turn off the machine first.
• While the device is still slightly warm use alcohols or specialised wax removal prod-
ucts.
• To clean the exterior, use a soft, damp cloth without detergent.