Wiha 45215 Manual De Instrucciones página 26

INSTRUCTION MANUAL
Hold
Use HOLD button to activate/deactivate Hold function.
• Short press (less than 1 s) on HOLD button activates Hold function.
• Next short press (less than 1 s) on HOLD button deactivates Hold function.
To activate/deactivate Hold function
Apply short press (less than 1 s) on the
HOLD button. After one beep sound
release the button.
When enabled, HOLD will appear on LCD.
When disabled, it will not be present on
LCD.
Minimum/Maximum/Average (MIN/MAX/AVG) measurement
Use MIN/MAX button to activate/deactivate and cycle through Minimum, Maximum
and Average measurement.
• Long press (more than 1 s) on HOLD/MIN/MAX button activates Minimum,
Maximum and Average functions. The LCD shows the minimum value that has
been measured. Whenever a new minimum value is detected and shown on the
LCD, it is also indicated by a short beep.
• Next short press (less than 1 s) on HOLD/MIN/MAX button shows the maximum
value that has been measured. Whenever a new maximum value is detected
and shown on the LCD, it is also indicated by a short beep.
• Next short press (less than 1 s) on HOLD/MIN/MAX button shows the average
value that has been measured. Each next constitutive short press on HOLD/
MIN/MAX button cycles through the MIN, MAX and AVG measurements.
• Long press (more than 1 s) on HOLD/MIN/MAX button when any of MIN, MAX
or AVG functions are shown on the LCD deactivates Minimum, Maximum and
Average functions.
To activate Minimum/Maximum/
Average function
Press MIN/MAX button and hold it pressed
(for more than 1 s) until you hear double-
beep sound.
The first function that is shown on LCD is
MIN.
To cycle through the MIN, MAX and
AVG functions
Apply short press (less than 1 s) on the
MIN/MAX button. After one beep sound
release the button.
26
HOLD
MIN MAX AVG