Kunert Professional MILA Manual De Instrucciones página 6

The car seat comes with a hood and a cover which are mounted with snaps.
The car seat is equipped with an adjustable handle. The handle is adjusted by pressing
the red buttons on both sides of the car seat and moving the handle into a desired
position (fig. 25). To remove the car seat, you need to pull the levers on both sides of
the car seat (fig. 26). To dismantle the adapters, press the buttons on the both sides of
the pram chassis.
HANDLE HEIGHT ADJUSTMENT
To adjust the handle height, you need to press the buttons on both sides of the handle
and then adjust the height while simultaneously pressing the buttons (fig. 27).
MOUNTING AND REMOVAL OF THE CARRYCOT
To mount the carrycot on the chassis, click it into designated slots (one on each side of the
pram) (figs 10, 11) until the hooks are locked. The hooks are locked automatically.
Warning The carrycot should always be mounted rear-facing (so that the child faces the
person pushing the pram).
To take the carrycot off, press the adapter buttons on both sides of the pram (fig. 11) and
lift the carrycot up using the handle.
CARRYCOT HOOD
The carrycot has a permanently attached hood. You can adjust the hood as necessary by
pressing buttons on both sides of the hood and positioning the hood as necessary (fig. 12).
The hood has a handle which is used to carry the carrycot (fig. 13).
The carrycot is equipped with a cover which can be mounted by attaching the snaps of the
cover to the respective snaps on both sides of the hood (fig. 14).
The carrycot is equipped with a cover which can be mounted by attaching the snaps of the
cover to the respective snaps on both sides of the hood (fig. 14).
MOUNTING AND REMOVAL OF THE PRAM SEAT
To mount the seat on the chassis, click it into designated slots (one on each side of the
pram) (fig. 15) until the hooks are locked (fig. 11). The hooks are locked automatically. The
stroller seat may be mounted in front-facing and rear-facing positions.
To remove the seat, press the buttons on the both sides of the pram chassis (fig. 11).
PRAM SEAT HOOD
The pram seat is equipped with a protective hood. To mount it, slide its hooks into
designated slots on both sides of the pram seat chassis until the hood is locked (fig. 16).
To remove the hood, press the buttons of the hooks on both sides and pull up the hood (fig.
16). The position of the hood is adjustable. It can be positioned differently. To adjust the
hood position, move it forwards or backwards to achieve the desired result (fig. 17).
If a newborn baby is put in the stroller, it is recommended to set the position of the seat
which is to be used from the baby's birth in a position similar to a lying one.
BACKREST ADJUSTMENT
The backrest can be adjusted in 4 positions. To lift the backrest up, you need to pull up the
lever from under the back of the seat and at the same time pull up the backrest up until you
reach the desired position. Next, release the lever (fig. 18).
To recline the backrest, you need to pull up the metal lever, place it in the desired position
and release the lever.
SWIVEL FRONT WHEELS
The pram has front swivel wheels with a lock of the straight-ahead push. In order to lock
the wheels, first position them parallel to the rest of the pram and then turn the rim to the
right (fig. 29). In order to unlock the front wheels to go in all directions, simply turn the rim
to the left.
FOLDING AND UNFOLDING THE PRAM CHASSIS
To unfold the pram chassis, lay it down flat, push the lock (fig. 1) and pull it up strongly
while holding the handle until the locking mechanism will lock into place (fig. 2).
CARRYCOT COVER
WARNING! Before using the pram, ensure the locking mechanisms are activated, if not,
pull them tighter.
The chassis may be folded in two ways (with and without wheels):
- to fold the chassis with the wheels, first lock the front wheels by positioning them across
the to the pram. Then, press the lock button with your thumb (fig. 3) and then
simultaneously pull the levers on both sides of the handle (fig. 4).
- to fold the chassis without wheels, take off two front wheels (fig. 5) and rear wheels (fig.
6). Then, press the lock button with your thumb (fig. 3) and simultaneously pull the levers
on both sides of the handle (fig. 4).
PARKING DEVICE
To activate the parking device, you need to step on the lever at the bottom of the pram
(fig. 28). The parking device will be released when the lever is lifted.
FOOTREST ADJUSTMENT
The footrest can be adjusted by simultaneously pressing side buttons while putting it in the
desired position (fig. 19).
MOUNTING AND REMOVAL OF REAR WHEELS
Before mounting the wheels, first mount the axes in the pram chassis. In order to mount
the axes, push the larger end of the axis into the absorber by pressing the red button, and
then release the button. Mount the axes on both sides of the pram and check whether
fixed properly (fig. 9).
To mount the rear wheels, press the metal button in the central part of the wheel (fig. 6)
and then slide the wheel on the axis as far as it will go, release the button and pull back
the wheel until you hear a "click" sound.
Always check whether the wheels are mounted correctly. In case the pram wheel comes
of when pulled, repeat the wheel mounting procedure until mounted properly.
FASTENING THE HARNESS
In order to fasten the harness, click the ends of the harness in hooks on both sides of
the carrycot. (The harness is not provided with the pram). To unbuckle the harness,
press on the sides of the buckle and pull them apart.
GUIDELINES AND WARNINGS
- Before assembling the pram, ensure that all the components are fit to use. If they are
damaged, the product should not be used.
- When you fold and unfold the pram, ensure that the child is at a safe distance.
- The parking device must be used every time the pram is stopped.
- While adjusting the pram, you must ensure that no moving parts are directly touching the
child.
- Any additional weight on the handle of the pram, the front/back of the seat and/or sides
of the pram makes it unstable.
- When going up a curb or any other step, it is important that you lift the front wheels.
- Store the pram in an area inaccessible to the child.
The pram must not be ridden down the stairs.
The pram should only be used with its original parts authorized by the manufacturer.
The chassis of the pram is compatible only with an original carrycot, seat and car seat
provided by the manufacturer. Only original components included in the set guarantee full
compatibility and proper functioning of the pram.
Every Kunert pram is marked with the company logo for product identification purposes.
The upholstery of the pram may be cleaned with a soft cloth, using soap or other mild
cleaning agents. You can apply oil or grease to the pram's axes, thus protecting it from
excessive wear. Any additional seat should be equipped with a clear compatibility
statement with a specific pram. Accessories not accepted by the manufacturer should not
be used. Only spare parts provided or recommended by the manufacturer/distributor
should be used. The parking device should be active when you put in and take out children
for the pram. The harness attaching hooks are located in the gondola. When mounting the