Craftsman CMCCS320 Manual De Instrucciones página 19

Three Year Limited Warranty
CRAFTSMAN will repair or replace, without charge, any
defects due to faulty materials or workmanship for three
years from the date of purchase (two years for batteries).
This warranty does not cover part failure due to normal wear
or tool abuse. For further detail of warranty coverage and
warranty repair information, visit www.craftsman.com
or call 1‑888‑331‑4569. This warranty does not apply to
accessories or damage caused where repairs have been
made or attempted by others. THIS LIMITED WARRANTY
IS GIVEN IN LIEU OF ALL OTHERS, INCLUDING THE IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, AND EXCLUDES ALL INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Some states do not allow
limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential
damages, so these limitations may not apply to you. This
warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
2 YEARS FREE SERViCE ON CRAFTSMAN
BATTERY PACKS
CMCB201, CMCB2011, CMCB2015
3 YEARS FREE SERViCE ON CRAFTSMAN
BATTERY PACKS
CMCB202, CMCB204, CMCB205, CMCB206, CMCB209
NOTE: Battery warranty voided if the battery pack is
tampered with in any way. CRAFTSMAN is not responsible for
any injury caused by tampering and may prosecute warranty
fraud to the fullest extent permitted by law.
90 DAY MONEY BACK gUARANTEE
If you are not completely satisfied with the performance of
your CRAFTSMAN Power Tool or Nailer for any reason, you
can return it within 90 days from the date of purchase with a
receipt for a full refund – no questions asked.
lATiN AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARNiNg lABEl REPlACEMENT: If your warning
labels become illegible or are missing, call 1‑888‑331‑4569
for a free replacement.
CMCCS320 TROUBLESHOOTING
BE SURE TO FOllOW SAFETY RUlES AND iNSTRUCTiONS
For assistance with your product, visit our website
at www.craftsman.com for a list of service centers,
or call CRAFTSMAN at 1‑888‑331‑4569.
Problem Solution
Unit will not start. •
•
•
Unit shuts down •
in use.
•
Battery will •
not charge.
•
•
•
•
Bar / Chain •
overheated.
Chain is loose. •
Poor cut quality. •
Unit runs but does •
not cut.
Check battery installation.
Check battery
charging requirements.
Check that lock off is fully pushed
down prior to moving main trigger.
Charge battery.
Unit is being forced. Restart and
apply less pressure.
Insert battery into charger until red
charging light illuminates.
Plug charger into a working outlet.
Refer to Important Charging
Notes for more details.
Check current at receptacle by
plugging an appliance.
Check to see if receptacle is
connected to a light switch which
turns power off when you turn out
the lights.
Move charger and appliance to
a surrounding air temperature
of above 40 °F (4.5 °C) or below
104 °F (+40 °C).
Refer to Adjusting Chain
Tension section.
Refer to Adjusting Chain
Tension section.
Refer to Adjusting Chain
Tension section. NOTE: Excessive
tension leads to excessive wear
and reduction in life of bar and
chain. Lubricate before each
cut. Refer to Replacing the
Saw Chain and Saw Chain
Sharpening section.
Chain could be installed
backwards. Refer to sections for
installing and removing chain.
ENgliSh
17