INSTALLATION
Installation
11.1 Installation location
Property damage
!
Install the appliance only in a frost-free space.
Property damage
!
The appliance is designed only for undersink installation.
The appliance water connections face toward the top.
Note
Make sure that enough clearance is left around the
appliance for maintenance work.
Install the appliance perpendicular and in the vicinity of the draw-
off point.
1 Minimum clearances
12. Installation
12.1 Installing the appliance
Mark the drill hole points using the bracket as a template.
Drill the holes and secure the wall mounting bracket with the
appropriate screws and accessories if needed for the wall
substrate.
Hang the appliance on the wall mounting bracket.
1 Mounting the UltraHot Plus/Premium
10
| UltraHot Plus
& UltraHot Premium
™
12.2 Water connection
Property damage
!
Carry out all plumbing connection and installation work
according to instructions.
Property damage
!
The appliance can leak and may fail to operate if installed
improperly.
Match the color coding of the water connection fittings and the
appliance:
- Blue = cold water supply inlet
- Red = hot water outlet
1 Plumbing connections
For the cold water supply: Plug the push-fit connector of
the fitting onto the cold water supply of the UltraHot Plus/
Premium.
For the hot water outlet: Push the
the sleeve of the hot water outlet on the UltraHot Plus/Premi-
um as far as it will go.
Secure the connection location by sliding on the ear clamp
provided and tightening it with ear clamp pliers, crimping
pliers, or end cutters.
Note
Make sure that the plumbing connections are not kinked
during installation. Avoid applying any tension during
installation.
Note
The hot water outlet tube should be installed so that it
rises in a constant slope to the faucet, without any sag
in the hose.
™
Do not expose the appliance to any water pressure.
Do not mix up the water connections.
7
/
16
www.stiebel-eltron-usa.com
˝ hose of the faucet onto