Assembly - Truper DES-430 Manual

Assembly

Handle
• Separate the hinge bracket from the straight axis frame
loosening the easy adjusting knob (a).
• Set the handle in the straight axis frame.
• Secure the handle in place and tighten the easy
adjusting knob firmly.
a
Straight Axis
• To rotate the handle, loosen the easy adjusting knob and
turn the handle (b) 90°. This is useful to store and
transport the grass trimmer.
Blade or circular saw installation
• Set the turn table onto the cutter head (1).
• Set the blade or circular saw onto the pressed turn table making
sure the turning direction of the blade or circular saw is the same as
the sense labeled on the guard (2).
• Set the flange onto the blade (3).
• Set the cover and the lock nut (4).
• Insert the Allen key in the pressed turn table to block the axis (5) and
tighten the lock nut counterclockwise using the included wrench (6).
• Use the guard with the protection removed. See the guard section.
Handle
b
Guard
• Fasten the guard into the cutting head using the bracket
and the bolts included (A).
• If using the line spool, use the guard with the protection (B)
included.
• When using the blade, remove the screw in the rear of
the guard (C). Press both clips (D) and remove the
protection.
A
4
5
D
C
B
6
The grass trimmers can also
be used with circular saws
(not included) that not exceed
the included blade diameter
3
2
1
7
ENGLISH