RiverRidge 06-086 Instrucciones De Ensamblaje página 11

STEP 7
1. Attach small back panel (11) and large back panel (13) to back of cabinet by inserting
23 screws (G) through holes on small back panel (11) and large back panel (13), then
tighten to back of cabinet.
STEP 8
1. Attach 1 drawer side panel (9) to drawer back board (10) by inserting 2 screws (F) through
holes on drawer side panel (9), then tighten to drawer back board (10).
2. Repeat above step to assemble another drawer side panel (9) to drawer back board (10).
3. Slide the drawer bottom board (7) into grooves on both drawer side panels (9).
4. Attach drawer front board (8) to drawer side panels (9) and drawer bottom board (7) by
inserting drawer bottom board (7) into groove on drawer front board (8), then inserting 4
screws (F) through holes on drawer side panels (9) and tighten to drawer front board (8).
5. Repeat above steps to assemble two more complete drawers.
6. Attach magnet plate (L) to door (12) by inserting 2 screws (D) through holes on magnet plate
(L), then tighten to door (12).
7. Attach 2 metal hinges (I) to door (12) by inserting 4 screws (D) through holes on metal
hinges (I), then tighten to door (12).
8. Attach knob (J) to door (12) by inserting 1 machine screw (K) through hole on door (12),
then tighten to knob (J).