RiverRidge 06-086 Instrucciones De Ensamblaje página 9

STEP 3
1. Attach magnet (M) to middle panel (14) by inserting 2 screws (N) through holes on magnet
(M) then tighten to middle panel (14).
2. Attach fixed shelf (4) to middle panel (14) by inserting cam bolts (A) into cam lock holes on
fixed shelf (4), then insert 2 cam locks (B) into the cam lock holes on fixed shelf (4), rotate
clockwise to secure cam bolts (A) in place.
3. Attach bottom board (5) to middle panel (14) by inserting cam bolts (A) into cam lock holes
on middle panel (14), then insert 2 cam locks (B) into the cam lock holes on middle panel
(14), rotate clockwise to secure cam bolts (A) in place.
4. Insert 1 wood dowel (C) into wood dowel hole on bottom board (5).
5. Attach decorative panel (6) to bottom board (5) by inserting the wood dowel (C) into wood
dowel hole on decorative panel (6).
STEP 4
1. Insert 2 wood dowels (C) into wood dowel holes on right side panel (3).
2. Attach right side panel (3) to bottom board (5) and decorative panel (6) by inserting cam
bolts (A) into cam lock holes on bottom board (5) and inserting wood dowels (C) into wood
dowel holes on decorative panel (6).
3. Insert 2 cam locks (B) into cam lock holes on bottom board (5), then rotate clockwise to
secure cam bolts (A) in place.
4. Insert 2 wood dowels (C) into wood dowel holes on left side panel (2).
5. Attach left side panel (2) to bottom board (5), decorative panel (6) and fixed shelf (4) by
inserting cam bolts (A) into cam lock holes on bottom board (5) and fixed shelf (4) and
inserting wood dowels (C) into wood dowel holes on decorative panel (6).
6. Insert 4 cam locks (B) into cam lock holes on bottom board (5) and fixed shelf (4), then
rotate clockwise to secure cam bolts (A) in place.