KRHÜNER 43139 Manual De Instrucciones página 5

ො If the power cord is damaged, in order to avoid risks, it should be replaced by the man-
ufacturer, maintenance department or similar sector professionals.
ො This appliance is not intended to be operated by means of an external timer or separate
remote-control system.
ො Only the appropriate connector must be used.
ො Do not use attachments not recommended or supplied for this product.
ො Disconnect the appliance from the power supply if it is left unattended and before as-
sembling, disassembling or cleaning.
ො Take care to avoid contact between the hot surfaces of the curler and the skin of the
face and neck.
ො Do not place the hot curler on any heat sensitive surface and always allow cooling be-
fore storing away.
ො Only change the brush attachment when the unit is unplugged and completely cool.
ො This appliance is not intended for professional use.
ො This device is equipped with a swivel cord, which must be replaced when damaged by
a swivel cord of the same type.
WARNING
The working surface will get very hot within a few seconds and should not be placed
in contact with the skin after the device is turned ON. The curler will get extremely hot
when the highest setting tempeture is chosen. Always do a test before using the curler to
insure the proper settings for your hair type.
2. HOW TO USE
PARTS
A. LED
B. Temperature setting +
C. Temperature setting -
D. On / Off Button
E. Swivel cord
F. Ceramic plates
G. Wire brush