Operation; Button Description; Icon Description - Cole-Parmer essentials HBC-300 Serie Manual De Instrucciones

OPERATION

Button Description

Page: From any display press to return to HOME display.
Scroll: Press to select a new parameter. If held down it will continually scroll through parameters.
Lower: Press to decrease an analogue value or to change the state of a digital (enumerated) value.
Raise:
Press to increase an analogue value or to change the state of a digital (enumerated) value.

Icon Description

OP1
Lit when output 1 is ON (normally heating)
OP2 Lit when output 2 is ON (normally cooling)
OP4 Lit when AA relay is ON (normally alarm)
SPX Alternative setpoint in use (SP2)
ALM Alarm active (Red)
REM Remote setpoint or communications active
RUN Timer running
RUN Flashing Timer in hold
MAN Manual
The control panel
15
Measured Temperature
(or Process Value 'PV')
Required Temperature
(or Setpoint 'SP')