Oster GCSTGS7050-013 Manual De Instrucciones página 11

ASSEMBLING THE GARMENT STEAMER
1. Remove all parts from the packaging.
2. Remove any plastic bags and labels from the unit.
3. Place the unit on the ground.
4. Place the rod into the rod receptacle on the unit. Extend the rods to release clips(end of outer
rod), align rod slot with protruding of receptacle, insert rod until click sound. Repeat for another
rod. (FIG 1)
5. Open the 3 latches and extend the bar to its full height. Lock the bar in place and close the
latches again. Do the same with the other bar.
6. Align rod slot with protruding of hanger,place the hanger on the poles. (FIG 2)
7. Position the board to the top smallest poles until you heard a "click" from all 4 holders. (FIG 3)
8. Place the pants clips onto hanger. (FIG 4)
9. Place the nozzle on the nozzle holder.
10. The unit is now assembled.
FIG 1
FIG 3
GCSTGS7050_22SEM5 (LA).indd 4 GCSTGS7050_22SEM5 (LA).indd 4
FIG 2
FIG 2
FIG 4
English - 4
2022/3/28 下午4:52 2022/3/28 下午4:52