Aukey SK-A6 Manual Del Usuario página 7

4. Press and hold the play/pause button on the secondary speakers for 3 seconds and the circle
indicator will rotate green
5. Wait a moment for both speakers to sync. Main speaker circle indicator will turn solid blue
and secondary speaker circle indicator will turn solid green when successfully synced
6. To link additional speakers, repeat steps 3, 4 & 5.
7. For greater sound coverage and volume, link up to a total of 8 AUKEY SK-A6 speakers
To switch a secondary speaker to main speaker:
1. Press and hold the play/pause button on the main speaker for 5 seconds until triangle button
turns green (main speaker is now a secondary speaker)
2. Press and hold the play/pause button on a secondary speaker for 5 seconds until triangle
button turns blue (secondary speaker is now the main speaker)
Notes
● The maximum operating range between the main speaker and secondary speakers is 30m. If
the secondary speakers exceed this range, they will automatically disconnect
● Speakers have a connections setup memory function, and will automatically reconnect to
each other in the previously used configuration when powered on
● Play/pause and calls-control / answering are enabled for the main speaker only
Sound Channel Switch
Each speaker can output both sound channels (stereo) or only left channel or right channel
sound. This feature is available when using more than one speaker. For general sound coverage,
all speakers can be set to stereo. When speakers are located to the left and right of listeners,
each one can be set to match its position so that left and right channel sound are more distinct
and heard from the correct sides.
● Short-press volume + and play/pause button simultaneously to switch sound channels
● Stereo – circle indicator flashes white twice
● Left channel – circle indicator flashes blue twice
● Right channel – circle indicator flashes green twice
- 05 -