1. General Functions
Turn on
Enter the
pairing
mode
Pairing
Turn off
Charging
Answer call
End call
Reject call
Volume up
Volume
Down
Press
power button until the light turns blue, if
there is a device connected before, automatically
connect the previous device, otherwise enter pairing
mode, the red and blue flash in turns.
If product is paired before, it will automatically connect
the previous device when turned on. If there's no
previous device, it will enter pairing mode, the red and
blue flash in turns, when connected, and the blue LED
flashes blue twice per 5 seconds.
In pairing mode, use a mobile phone with Bluetooth
function or other Bluetooth Master Device to perform
pairing action.
When device is on, press the
seconds, the red LED flashes for 1second, the product
shuts down.
Plug the charger to port of the device. (Red LED is on.)
Short press
Short press
Long press
incoming call.
Short press
Short press
button for an incoming call.
button again to end call.
button for 1~2 seconds to reject
button for volume up.
button for volume down.
- 1 -
English
power button 4