User Instructions; How To Use - Easy Home KL-L008 Manual Del Usuario

How to use the gooseneck LED touch desk lamp
1. Turn the lamp ON & OFF using the touch power switch (B) located in the front
upper side of the base (A) with the silver circle. The touch power switch
controls the 3 levels of brightness as well as turning the lamp ON & OFF.
2. To change the LED settings, lightly touch the switch (B) for the following:
a. First touch will turn the lamp ON to the lowest setting.
b. Second touch will change the lamp to the medium brightness.
c. Third touch will change the lamp to the highest brightness.
d. Fourth touch will turn the lamp OFF.
3. To position the lamp head (C) simply bend the flexible neck (G) as needed.
Hold the lamp base (A) while adjusting the lamp head (C).
4. The lamp head (C) included in this unit cannot be replaced by the consumer.
5. There is an integral USB port (H) as part of the base that can be used to charge
your cell phone, tablet, or other devices that use a USB cable while the lamp is
plugged in.
8
THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.
SAVE THESE INSTRUCTIONS!

User instructions