Yeyian ODRAZ Manual Del Usuario página 8

MONITOR CONTROLS
1 . OSD Control buttons
2. Power Light
3. Power button
OSD Control buttons
E Select signal source or Exit OSD
Go Up on the Main OSD Menu Increase the value of a selected item
Go Down on the Main OSD Menu De ease the value of a selected item
M Open the Main OSD Menu and Select submenu
Turn the monitor ON or OFF
1. Press the POWER button on the monitor or to turn it on (The indicator will be
blue)
2. Connect the relevant cable to the corresponding input on the monitor. The
source will be automatically detected.
3. To change between inputs, press the EXIT button to enter the source menu. Use
the and buttons to choose the input source between HDMI1,HDMI2 and DP.