Package Contents; Safety Information - LF allen + roth AC182-C2 Instrucciones De Ensamblaje

PACKAGE CONTENTS

HARDWARE CONTENTS (shown actual size)
AA
Mounting Bracket
Qty. 1
(Not to scale)

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or
install the product.
WARNING
Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by
removing fuse (or switching off circuit breaker).
CAUTION
•All electrical connections must be in agreement with local codes, ordinances or the national
electric code (NEC). Contact your municipal building department to learn about your local
codes, permits and/or inspections.
•Do not connect this fixture to an electrical system that does not provide means for equipment
grounding. Never use a fixture in a two-wire system that is not grounded.
•If you are not sure your lighting system has a grounding means or not, do not attempt to install
this fixture. Consult a qualified, licensed electrician for information with regards to proper
grounding methods as required by the local electrical code in your area.
•If a dimmer control switch is used with this fixture, obtain professional advice to determine the
correct type and electrical rating required.
PREPARATION
Before beginning assembly, installation or operation of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list. If any part is missing or
damaged, do not attempt to assemble, install or operate the product.
Estimated Assembly Time: 15 minutes
Tools required for assembly (not included): Phillips Screwdriver, Electrical Tape, Safety Glasses,
(not included)
Helpful tools
A
B
CC
BB
Wire Nut
Outlet Box Screw
Qty. 3
Qty. 2
: Wire Strippers, Pliers.
PART DESCRIPTION
A
Glass Shade
Fixture
B
DD
EE
Bracket Screw Bracket Screw
Nipple
Qty. 2
Qty. 1
Lowes.com/allenandroth
2
QUANTITY
1
QUANTITY
1
B
FF GG
Bottom Nut
Qty. 1
Bottom Cap
Qty. 1