MiLECTRIC RFD-210B Manual De Funcionamiento Para El Usuario página 44

11. Replace the lower hinge part to the left
side and fixing it with the special flange
self-tapping screws. Replace the adjustable
bottom feet parts to another side and fixing
it .
12. T ransfer the lower door to the property
position, adjust the lower hinge part, make
the hinge axis into the lower hale of the
lower door, then light the bolts.
13. Uptum the middle hinge part the
direction 180 degree, transfer it and adjust
its position, make the middle hinge axis
into the upper hale of the lower door, tight
the bolts.
7
1 4 . Transfer the upper door to the
appropriate position. Secure the door's
level, make the middle hinge axis into the
lower hale of the upper door.
selftapping screws
15. Transfer the upper hinge part and
make the upper hinge axis into the upper
hale of the upper door, and adjust the
position of the upper door (please support
the upper door with your hand when doing
it), fixing the upper hinge part with the
special flange self-tapping screws.
16. lnstall the screw hale cover on the top
right comer of the refrigerator. lnstall the
upper hinge cover (which is in the plastic
bag) on the left comer. Put the other
upper hinge cover into the plastic bag.
17. Open the upper door and install the
door shelves, then clase it.
Warning!
When changing the side at which the door
opens, the appliance must not be
connected to the mains. Remove plug
from the mains beforehand.
16