Mixing Tips - Premier ED-4383 Manual De Instrucciones

Mixing Tips

Cookie dough is one of the thickest doughs to mix. Make it easier by following these tips:•Use a large
mixing bowl, like the one provided, to spread out ingredients for easier mixing.
• Have butter or margarine at room temperature.
• Add ingredients one at a time, thoroughly mixing after each addition.
• Add flour one cup at a time.
•If adding chips or nuts to a very thick dough or batter, we recommend stir-ring them in by hand at the
very end
of the recipe.
HOW TO ASSEMBLE STAND
The stand mixer is very convenient for most recipes. However, small amounts–like one cup of cream–
may not contact the beaters in the stand mixer mode. In these cases we recommend using as a hand
mixer.
NOTE:
Attach mixer to stand before attaching mixing shield, beaters, or other attachments.
1.Set stand on counter and put turntable onto stand. With platform level and while hold- ing mixer as
shown, place
L-shaped tab on platform into slot on bottom of mixer, as illustrated.
2. As the mixer is lowered, gently press the back of the platform until it locks in position.
3.The mixer can now be used as a stand mixer.
OPTIONAL ATTACHMENTS (AVAILABLE ON SELECTED MODELS)
Before first use: wash beaters or attachments in warm, sudsy water; rinse and dry.
Always unplug mixer from electrical outlet before inserting or removing attachments.
Before first use: wash beaters or attachments in warm, sudsy water; rinse and dry.
Always unplug mixer from electrical outlet before inserting or removing attachments.
ATTACHMENT
To Insert Attachments Flat Beaters, Straight Wire Beaters, and Whisk
1.Always make sure mixer is unplugged and speed control is set to OFF.
2.Insert a beater or attachment into an opening on the bottom of the mixer. Push until it clicks into place.
Repeat with Bother beater or attachment.
Twisted Wire Beaters and Dough Hooks
1. Always make sure mixer is unpluggedand speed control is set to OFF.
2. Insert the wire beater or the dough, hook with the collar into the opening indi-cated by the illustration
on the mixer.
3. Align tabs on the beater or dough hook with the slots in the opening. Push until it clicks into place.
Repeat with other beater or dough hook.
DESCRIPTION
The flat beaters are designed for general mixing purposes.
The dough hooks can perfectly knead a one loaf bread recipe. Always
use dough hooks on speed 4, 5, or 6 in the hand mixer mode. Do not
use dough hooks in the stand mixer mode.
P-3