Sharpening The Blade - AmazonBasics B07V3QLZ5Y Manual Del Usuario

EN
NOTICE
Some lubrication solutions may interact with the
wood what may affect the look of the wood. Ask your dealer for
an accurate lubrication solution�
8.2

Sharpening the blade

Use quality oil sharpening stones� Lubricate them with an accurate
lubrication solution�
1� Remove the blade (E) from the tool�
2� Place the cutting edge (K) against the sharpening stone at
approximately 25° angle�
3� Slightly lift the blade (E) to a 30° angle.
4� Pull the blade (E) backwards to sharpen the cutting edge (K)�
Repeat until sharpened�
5� Draw the sharpened cutting edge (K) across the corner of a
scrap piece of wood to remove burr�
6� Reassemble the tool�
10
25°
30°