Flattening The Sole; Storage - AmazonBasics B07V3QLZ5Y Manual Del Usuario

8.3

Flattening the sole

NOTICE
Make sure all parts are installed and in tension
before flattening the sole (I)� Otherwise, the blade (E) becomes
flex once the parts are reinstalled to the tool.
1� Affix a coarse sandpaper to a dead-flat surface, such as a
granite or cast iron table�
2� Draw lines across the entire sole (I) at regular intervals with a
permanent marker�
3� Holding the tool with even pressure at the front and back,
work the sole (I) over the sandpaper�
4� Pause periodically to check and continue until all lines on the
sole (I) fade evenly�
5� When all lines are removed, polish the sole (I) by working it
over a fine sandpaper.
8.4

Storage

» Store in a cool and dry place away from children and pets,
ideally in original packaging�
EN
11