BST ASB-ONE Manual De Instrucciones página 4

4 • ASB-ONE
IMPORTANT NOTE : Appliances containing Lithium-ion batteries
1. PRIOR to using the unit for the first time, please charge fully the battery
2. Charge the battery regularly after each use. Don't wait until it is discharged!
3. DON'T allow the battery to discharge completely, otherwise it will lose 20% of its capacity or even be
totally damaged! If the voltage becomes too low, the internal circuits are not powered anymore and it
will become impossible to recharge the battery!
4. If you don't use the unit for a longer period of time, it is recommended to charge it at 40% of its capa-
city and check/charge it once per month.
The life time of the battery depends on the observance of these recommendations.
** BATTERIES ARE NOT COVERED BY THE WARRANTY **
We cannot be held responsible for damaged batteries further to the non-observance of these basic
ON-OFF-CHARGE ONLY
Though the battery will always charge while the unit is connected to AC power, "Charge Only" enables you
to charge your battery more quickly. To enable quick charge, turn the power switch to CHARGE ONLY when
the unit is not in use.
It takes generally 2 hours to fully charge the battery. The operating time with a fully charged battery at 100%
volume is 2h.
FEATURES
• Bluetooth with TWS function
• USB & SD
• 2 balanced MIC/LINE inputs with volume control
• 1 balanced XLR output
• Class D amplifier
• Separate bass & treble controls
• Rechargeable batteries for up to 6 hours of use
• Power, Signal & Clipping indicators
• 35mm insert for stand mounting
• Slanted shape for tilt, stage monitor or wall mount
• Top-mounted handle
Control Panel
1. LCD display with mode switch, reverse, fast forward, repeat, play/pause/TWS buttons
2. Insert a USB stick into this port to play the stored music
3. Insert a SD card into this slot to play the stored music
4. Volume control of MP3 player
5. Connect an XLR cable to the line level output to the CH1 or CH2 input of a second ASB-ONE to create a
mono, 2-speaker setup. Please note: Line Out is post mix.
6. Analog XLR channel input for a microphone or instrument
7. Press to select mic or guitar input
8. Volume control of the microphone, instrument or other audio source
9. Adjustment of the high frequency balance of your microphone or instrument
rules.