SOLIS 7910 Guia De Inicio Rapido página 15

B E F O R E F I R S T U S E
V
1. Rinse the following parts with hot water:
– Two-sided grill plate
1
– Pans
7
– Mini-woks
8
– Dough cutter
9
– Spatulas
q
2. Leave the parts to dry.
3. Install the appliance according to chapter Installation.
Turn the grill plate temperature control
4.
r
5. Let the appliance heat up for 10 minutes.
When using the appliance for the first time, smoke can occur. This is normal, due to burnt
4
manufacturing residue.
Turn the grill plate temperature control
6.
r
Switch off the ON/OFF switch
7. to O to switch off the appliance.
w
8. Disconnect the appliance from the power source.
9. Let the appliance cool down.
10. Wipe both sides of the two-sided grill plate
I N S TA L L AT I O N
V
1. Place the base plate on a flat, stable, and heat and moisture resistant surface.
6
2. Place the appliance on the base plate 6.
3. Choose which side of the two-sided grill plate
The two-sided grill plate has two usable sides:
4
– Classic grooved grill;
– Grill plate with round insets for preparing crêpes, or as a heater plate for the mini-woks.
Place the two-sided grill plate
4. on the appliance.
1
U S I N G T H E G R I L L
V
Rub the two-sided grill plate
1. with a paper towel soaked in cooking oil.
1
Turn the grill plate temperature control
2.
r
3. Plug the power cable into the power port e.
5
4. Plug the other end of the power cable into a power outlet.
5
5. Switch the ON/OFF switch to | to switch on the appliance.
w
6. Set the grill plate temperature control
r
7. Let the appliance heat up for 15 minutes.
– The grill plate temperature control
– The grill plate temperature control
set temperature.
– The grill plate temperature control
temperature control is turned to the maximum position.
The appliance is now ready for use.
24
to the maximum position.
to 0.
with a slightly damp cloth.
1
you want to use.
1
to 0.
to the desired temperature.
lights up red when the appliance is heating up.
r
lights up green when the appliance has reached the
r
lights up red continuously when the griddle
r
U S I N G T H E PA N S
V
Place the pans or the mini-woks on the die-cast plate 3.
1.
7 8
2. Switch the lower heating element power switch
4.
– The lower heating LED lights up and the lower heating element
y
The temperature of the lower heating element
4
C L E A N I N G A N D C A R E
V
We recommend cleaning the appliance after use. To clean the appliance:
Switch off the lower heating element power switch
1.
lower heating element 4.
Switch off the ON/OFF switch
2. to O to switch off the appliance.
w
Turn the grill plate temperature control
3.
r
4. Disconnect the appliance from the power source.
5. Let the appliance cool down.
6. Fully disassemble the appliance.
7. Rinse the following parts with hot water:
– Two-sided grill plate
1
– Pans
7
– Mini-woks
8
– Dough cutter
9
– Spatulas
q
These parts can also be soaked in hot water to loosen persistent residue.
4
8. Clean the appliance with a damp cloth.
9. Leave the parts to dry.
10. Reassemble the appliance.
11. Store the appliance in the original packaging in a dry and enclosed space.
T E C H N I C A L S P E C I F I C AT I O N S
V
Model-No.
Voltage / frequency
Output upper heating element
Output lower heating element
Dimensions (W x D x H)
Weight
Technical changes reserved.
to | to switch on the lower heating element
t
heats up
4
cannot be adjusted.
4
to O to switch off the
t
to 0.
Type 7910
230 V~ / 50 Hz
900 W
120 W
27 x 33 x 16 cm
4.8 kg
25