Whalen OD-MA48PD Manual De Instrucciones página 5

B
D
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go
back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Glue the wood dowels (5) into the end holes on both Cabinet Side Panels (B and C) and Back Panel (D)
as shown. It is very important to use a small amount of glue on both ends of dowels and wipe off the
excess glue immediately with a damp cloth.
3. Align and attach the Cabinet Back Panel (D) between the Cabinet Side Panels (B and C) with two 32
mm Bolts (2), two Lock Washers (3) and two Flat Washers (4).
Assembly Instructions
5
5
5
5
5
B/C
4
3
2
D
C
C
5
B
D
5
5
5