Product Description; General Product Overview - Novoferm NovoDock L340 Traducción Del Manual De Funcionamiento Original

3

Product description

1
Fig. 1: Exemplary representation, illustration may deviate from the product
1 Control unit
2 Underride area
3 Cabling
4 Hinged lip
The dock leveller platform is hinged on the side of the
dock leveller ramp and can therefore be adjusted in
height on the side of the vehicle. The hinged lip is
used for placing the platform on the truck loading
area. The hinged lip controls the height compensation
even if the truck is moving in height. At the same
time, it allows the truck to be driven over with a forklift
truck.
The dock leveller platform is aligned flush with the
ground and can be driven over with full nominal load
when it is in resting position.
26 - EN
6
5
4
2
8
3
5 Hinged lip cylinder
6 Hydraulic unit
7 Dock leveller platform
8 Rating plate
3.1

General product overview

7
9
9
10
11
12
These assembly, operation and maintenance instructions must be kept for the entire period of use!
12
11
10
Side panel/protective panel
Lifting cylinder
Warning stripes
Frame