Coffee Grinding Operation; Maintenance And Cleaning - Wilfa UNIFORM Manual De Instrucciones

COFFEE GRINDING OPERATION

• Press and release the start button (1).
• The button light glow white.
• The grinder will automatically stop after end of grinding, white light pulsing
(3 times, 2 sec on, 2 sec off).
• Complete the grinding job, then the light will turn off.
CANCEL
• Press and release the start button (1).
• The light will turn off and stop grinding.

MAINTENANCE AND CLEANING

• When using espresso at the finest setting, the device may stop at some
occasions. If this happen, grind coffee with a coarser setting such as #25 and
let the burrs grind out the remaining coffee residue that blocks the grinder
house. It is then ready for use again.
• Do not immerse the unit into liquid/water or put it in a dishwasher.
• Clean the scale with a slightly damp cloth. Do not use chemical/abrasive
cleaning agents.
• Do not clean or perform maintenance on the unit while the plug is connect-
ed to the main supply.
• Clean the casing (9), the lid of the coffee bean cup /scale, the coffee bean
cup and coffee with a dry cloth. Never use a wet or heavily chemical cleaning
agent.
• Do not open the product, as this will invalidate the purchase warranty.
COFFEE GRINDER · WSFBS-200B
9
EN