Worx Nitro WG330E Manual Original página 17

This product could be adjusted to different
opening width.
While product is active, depress the Safety
Trigger while simultaneously depressing
the ON/OFF Trigger. 2 seconds later, please
release the ON/OFF Trigger after hearing
a beep. Then the blades could exchange
cutting size between MAX cut opening and
small cut opening in order.
WARNING! When the product is in the
open position, even if release both
triggers, the product will stay active for
about one minute.
Need to re-run the product-
Within one minute, firstly push the Safety
Lock trigger and later depress the ON/
OFF Trigger, then the product will get
re-activated to work. Even if you release
the ON/OFF Trigger while depressing the
Safety Lock trigger, the product will be
able to cut once press the ON/OFF Trigger
within 20 seconds. Or else, the LED Light
Indicator will go out and the product will
turn off if you do not press the ON/OFF
Trigger within 20 seconds.
No need to re-run the product-
The product will be powered down if no
action within 1 minute.
STORAGE MODE & SWITCH OFF
While product is active, depress the Safety
Trigger while simultaneously depressing
the ON/OFF Trigger. The blades will close
and beep once. Continue to hold until
product beeps twice. LED Light Indicator
will turn off, blades will stay closed, and
product is now inactive. Remove battery
for storage.
WARNING: Please remove battery for
storage after the blades have been closed
and the product has turned off.
The cutting blade is coated with Titanium,
which improves the lifespan of the durable
and effective high carbon steel SK5
See Fig. J
blade by 3 times or more. Its non- stick
characteristics also makes cleaning and
maintenance a breeze
WARNING: Do not touch the blades
with your hands.
PRUNING TIPS
The cordless pruner shears are ideal for cutting and
trimming shrub and tree branches to promote healthy
growth, and to control the shape.
1. Please make sure the cut is always above 8mm from
the bud cause this will allow wound to heal properly and
angle that the branch should be cut at 45°. (See Fig N)
2. When cutting, please do clean cuts that slope away
from the bud, which will let rain run away easily and
encourage new growth.(See Fig O)
See Fig. K
EN
See Fig.L.M
17