Blade Maintenance; Storage; Environmental Protection; Declaration Of Conformity - Worx Nitro WG330E Manual Original

3. When pruning the entire stem, please cut the stem
from the point where it branched.(See Fig P)
6. MAINTENANCE
WARNING: When you need to start inspection,
maintenance and cleaning work, please make sure
the product has been switched off, it has cooled down and
the battery pack has been removed.
1. Never use solvents to clean the product and never
immerse the product in any liquid. Only use a dry cloth to
clean the product.
2. Never directly operate the product if some broken or
worn parts are found. Please inspect the product before
EN
each usage.
18

BLADE MAINTENANCE

1. When need to sharpen the blades, please open the
blades to the max cut opening , turn the product off and re-
move the battery. Then use a strip of grindstone to sharpen
the blades in a careful way.
2. Always keep blades free of leaves or debris.
WARNING: Wear protective gloves while clean and
sharpen the blades.

7. STORAGE

WARNING: When not in use, please press the on/
off switch for a long time to close the blades as
operation instruction shown.
1. Keep the product in a dry place and never let it immerse
into any liquid.
2. keep the product from away from children.
3. Before use the product after long-time storage, please
fully recharger the product.

8. ENVIRONMENTAL PROTECTION

Waste electrical products must not be disposed of
with household waste. Please recycle where facilities
exist. Check with your local authorities or retailer for
recycling advice.
FOR BATTERY TOOLS
The ambient temperature range for tool and battery use
and storage is 0
C-45 C.
o o
The recommended ambient temperature range for the
charging system during charging is 0

9. DECLARATION OF CONFORMITY

We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
On behalf of Positec declare that the product
Description Cordless Pruning Shears
Type WG330E WG330E.X (330- designation of
machinery, representative of Cordless Pruning Shears)
Function Pruning
Complies with the following Directives,
C-40 C.
o o