Publicidad
Idiomas disponibles
Idiomas disponibles
EN
UNIFIX 300.1 C – ASSEMBLY
•
Pre-tighten parts N°11 on part N°10. Close the mounting bracket and check that openings of parts
N°11 are properly centered to the screws. Once the openings well centered, you can tighten the
screws.
•
Operate final tightening of parts N°9 that were previously pre-tightened.
N°11
X1
•
Place gas springs and screw them. BE CAREFUL, two positions available (refer to following page).
N°18
M8
X8
20
N°16
BHC M8x20
X4
N°22
X4
www.uniteck.fr
N°17
D8
X4
N°18
M8
X4
Publicidad
