Saivod DHX-10D Manual Del Usuario página 89

LED INDICATORS
1. WATER FULL-LED
2. Compressor-LED
3. DEFROST
4. TIMER-LED
HUMIDITY LEVEL & TIMER 2 DIGIT DISPLAY
THE INDICATOR FEATURES 3 FUNCTIONS:
1. When you set the humidity, it will indicate the humidity that you have selected.
GB
2. When you program the time for the unit to turn on and off, it will show the hours.
3. When the environment humidity is lower than 35%, it will show "LO".
4. When the environment humidity is higher than 95%, it will show "HI".
PUSH BUTTON FUNCTIONS
A. Power Push Button
B. DOWN Push Button
C. UP Push Button
B. Timer Push Button
OPERATING INSTRUCTIONS
1. Press button once to start operation. Press it again to stop operation.
2. Press or button to set the desired humidity level in the room, which can be set
from 30% to 90% at 5% intervals or "CO".
After a period of working,when environment humidity is lower than the selected humidity by
2%, compressor will stop and fan stops working 3 mintues later;When environment humidity
is equel to or higher than the selected humidity by 3%, compressor will restart once 3-minute
compressor protection time over.
When setting the humidity to " CO ", the compressor will run continuously.
3. Press button can be timer setting.
89