EIBENSTOCK EHR 18.1S SET Instrucciones De Servicio página 12

Technical Data
Stirrer EHR 18.1 S SET
Rated voltage:
Rated power input:
Rated current:
Frequency:
No Load Speed:
Load Speed:
Max. basket diameter:
Thread connection:
Protection class:
Degree of protection:
Net weight:
Order number:
Interference suppression:
Special Accessory:
Round Stirring Rod RG 120
Helicon Ribbon Stirring Rod WG 120
Disc Stirring Rod SG 120
Mortar Stirring Rod MG 120
... with M 14 thread connection
Stirrer with stirring rod and operating instructions in a set cardboard box.
Application for Intended Purpose
The Stirrer EHR 18.1 S is designed for use in mixing paint, glue, tile
cement, filler, mortar and other media in batches up to about 40 kg.
The diameter of the used stirring rods should not exceed 120 mm.
Safety Instructions
Safe work with the machine is only possible, if you read
these operating instructions completely and strictly
follow the instructions contained herein.
In addition, the general safety instructions in the
enclosed brochure have to be observed. Take part in a
practical introduction before the first use. Save all
warnings and instructions for future reference.
Article
Supply
EN 55014 and EN 61000
12
230 V ~ 110 V ~
1100 W 1100 W
4,7 A 10,1 A
50 / 60 Hz
800 rpm
0 – 450 rpm
120 mm
M 14
II
IP 20
about. 4,1 kg
077E1000
Order No.
31124000
31224000
31524000
31324000