imilab CMSXJ33A Manual Del Usuario página 10

Explanations for LEDS
Hub LED Status
Press and hold the button
for 10 seconds, until the
Video Doorbell LED Status
Press and hold the sync button for 2 seconds
until the blue light becomes to solid
Power
Press and hold the sync button for 8 seconds
on/o
until the LED blinks green
Use USB to charge the doorbell
continuous blinking green
Doorbell
charging
Solid green
PIR
Orange blinks once
detection
sensitivity
Orange blinks continuously
adjustment
Press the doorbell button, then doorbell
Doorbell
function
indicator light will blink blue
Blinking blue
Solid blue
Blue and orange
flashes alternately
Blinking orange
Solid orange
LED blinks blue
Waiting for connection
Network connection is successful / connected
Network connection is failure
Waiting for doorbell to connect
A firmware update is in progress
During the reset process, the hub will restart
You will hear the power-on music
you will hear the power-o music
PIR continues to detect motion
EN-08
Status
Status
Charging
Fully charged
PIR detects motion
Both the outdoor doorbell
and the indoor hub will ring