imilab CMSXJ33A Manual Del Usuario página 6

Place the Screw Hole Positioning Card against the wall to mark the position.
Mount the Doorbell on a Wooden Surface
If you're mounting the doorbell on a wooden surface, you don't need to pre-drill pilot
holes. Use the provided screws to secure the Mounting Bracket on the wall, The Screw Hole
Positioning Card indicates the position of the screw holes. What is required: Screwdriver,
Mounting Bracket, 15 Wedge , Mounting Screws and Anchors.
° Mounting
Screwdriver Mounting Bracket 15° Mounting Mounting Screws
(not provided) Wedge and Anchors
Wall Mounting Wall Mounting Mounting
Bracket Wedge Bracket
Without 15° Mounting wedge With 15° Mounting wedge
EN-04