smartmi 2 Manual De Usuario página 10

Filter status reminder
98% of filter life
remaining
1 Filter life reminder
The filter lifespan will show on screen
when you first power on the air purifier.
Below actions will display filter life
remaining on screen when the purifier
detects remaining filter life is more than
10%
1. The air purifier is unplugged and
power on again.
2. The filter compartment panel open
and closed, power on again.
Note: It is recommended to replace the filter every 6–12 months. Since the filter contains activated carbon,
when saturated, the filter will retain the odor of the harmful gases it has absorbed. Leaving a used filter in
a place with adequate light and ventilation will allow the activated carbon to recover, partially restoring the
filter's absorption capability. To ensure your purifier properly works and purifies, please replace filter in time
when reminder of filter lifespan exhausted.
2% of filter life
remaining
2 Filter replacement reminder
When the purifier detects remaining filter
life of 10% or less, the screen will display
a QR code for buying a new filter, and
the filter life remaining will display on
screen each time powered on.
9
Resetting the Filter
When the air purifier is in standby mode,
long press the "Display On/ Off Button" on
the back of purifier for 5 seconds, with 2
short beeps heard the filter is successfully
reset, and the purifier restarts to calculate
the filter lifespan.