Itiwit X500 Guia Del Usuario página 2

USER GUIDE - KAYAK ITIWIT X500 STRENFIT 2 PERSON
Strenfit X500 2P : 8552930
Congratulations, you have just purchased an ITIWIT kayak. Our team is proud to offer you a quality product. Reading this manual carefully will help you to use your
product properly.
1. Instructions for use - Preparing the kayak
2. Care, packing away and storage
2.1 Care after use
2.2 Drying
2.3 Folding
2.4 Storage
3. Repair
3.1 Loss of pressure
3.2. Spare parts (After Sales Service))
1. INSTRUCTIONS FOR USE - PREPARING THE KAYAK
• Lay the kayak out flat on a clean surface, without any objects that might damage the inflatable structure.
Find the kayak's inflation valves and understand how they work (A) - Check that the valves are closed (A2)
Open position (A1): the spring is depressed, the valve is open, the air escapes, the kayak deflates.
Closed position (A2): the spring is released, the valve is closed, connect the end of the pump to inflate.
Connect the ITIWIT pump (sold separately) by turning ¼ turn (A3). Insert the plug when you have finished inflating the kayak (A4)..
• Inflate the main section (hull) then the intermediate sections (walls), then the small sections (arches). that way, inflating the boat will become easier and easier.
(A5). Each section should be inflated to at most 15 PSI.
Insert the toe clips in the flexible mounts (B1), push them into the kayak (B2) and adjust the length of the base using the ring (B3).
Position the seats by fitting them into the slots designed for the purpose (C1) Position the back rest beneath the coaming (C2).
Place luggage and equipment in the kayak's rear locker or attach them on the after deck.
Close the hatch again The boat is ready for launch
Adjust the toe clips using the straps designed for the purpose (B3).
Corrosive liquids such as battery acid, oil, petroleum and acetone can damage the product.
In case of contact with these products, rinse the kayak with fresh water.
2.1 Maintenance after use
• Rinse the kayak, hull and seats with clean water after each use to avoid damage from sand, salt water and sun. (D1)
• Turn the kayak over and empty it by moving it back and forth . The water will escape through the coaming (D2)
2. CARE, PACKING AWAY AND STORAGE
p.2