Mounting On A Table; Attaching The Tv To A Desk - LG AM-ST21BB Manual De Usuario

4

Mounting on a Table

1 Lift and tilt the TV into its upright position on a table.
• Leave a 10 cm (4 inches) (minimum) space from the wall for
proper ventilation.
2 Connect the power cord to a wall outlet.
• Do not apply foreign substances (oils, lubricants, etc.) to the
screw parts when assembling the product. (Doing so may
damage the product.)
• If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
• Do not use any unapproved items to ensure the safety and
product life span.
• Any damage or injuries caused by using unapproved items
are not covered by the manufacturer's warranty.
• Make sure that the screws are inserted correctly and fastened
securely. (If they are not fastened securely enough, the TV
may tilt forward after being installed.) Do not use too much
force and over tighten the screws; otherwise screw may be
damaged and not tighten correctly.
• Only use the authorized stand and wall mounting bracket
made specifically for LG products.
- Pursuant to Consumer Protection Law, LG Electronics will
not be held responsible for any product malfunction,
material damage or injury caused by using products not
authorized by LG Electronics.
10 cm
(4 inches)

Attaching the TV to a Desk

(Depending on model)
The TV should be attached to a desk so it cannot be pulled in a forward/
backward direction, potentially causing injury or damaging the product.
A type
4-Screws
(Not supplied with TV)
Stand
• Screw: M5 x L (*L: Table depth + 8~10 mm (0.31~0.39 inches))
ex) Table depth: 15 mm (0.5 inches), Screw: M5 x L25
B type
2-Screws for Stand Fixing,
2-Washers for Stand Fixing,
2-Nuts for Stand Fixing
(Supplied with TV)
Stand
Desk
Desk